Improve individual part rendering

alpha_adaptor.scad

@@ -22,39 +22,36 @@ screw_hole_bevel_h = 1.8
 screw_hole_padding_lower = 1.8
 */
 
-lower();
+alpha_adaptor();
 
 module alpha_adaptor() {
-  difference(){
   union(){
     lower();
     translate([0, 0, 3.6])
       upper();
   }
-    cylinder(h = 10, r = 35 / 2);
-    translate([0,0,7.6 - 2.8])
-      base(b = 0);
-  }
 }
 
-module upper(h = 4, size = 59.6, r = 3.5){
+module upper(solo = false, h = 4, size = 59.6, r = 3.5){
   difference() {
     rounded_rect(h = h, size = size, r = r);
     screw_holes();
     center_hole();
     translate([0,0,h - 2.8])
       base(b = 0);
+    if(solo)
       guide_posts();
   }
 }
 
-module lower(h = 3.6, size = 52.6, r = 15){
+module lower(solo = false, h = 3.6, size = 52.6, r = 15){
   difference() {
     union(){
       rounded_rect(h = h, size = size, r = r);
+      if(solo)
         guide_posts();
     }
-    screw_holes();
+    screw_holes(r2 = 4.8/2);
     center_hole();
   }
 }
@@ -63,9 +60,9 @@ module center_hole() {
   cylinder(h = 10, r = 35 / 2);
 }
 
-module guide_posts(h = 7.6, r = 4.8 / 2) {
+module guide_posts(h = 7.6, r = 6.5 / 2) {
   rotate([0,0,45])
-    screw_holes(h = 7.6, r1 = r, r2 = r);
+    screw_holes(h = 7.6, r1 = r, r2 = r, pos = 61.8 / 2);
 }
 
 module screw_holes(h = 10, r1 = 4.8 / 2, r2 = 5.6 / 2, pos = 52.6 / 2 - 1.8){
@@ -73,22 +70,22 @@ module screw_holes(h = 10, r1 = 4.8 / 2, r2 = 5.6 / 2, pos = 52.6 / 2 - 1.8){
   chamfer_height = r2 - r1;
   translate([offset, 0, 0]){
     cylinder(h = h, r = r1);
-    translate([0, 0 , 7.6 - chamfer_height])
+    translate([0, 0 ,4 - chamfer_height])
       cylinder(h = chamfer_height, r1 = r1, r2 = r2);
   }
   translate([-offset, 0, 0]){
     cylinder(h = h, r = r1);
-    translate([0, 0 ,7.6 - chamfer_height])
+    translate([0, 0 ,4 - chamfer_height])
       cylinder(h = chamfer_height, r1 = r1, r2 = r2);
   }
   translate([0, offset, 0]){
     cylinder(h = h, r = r1);
-    translate([0, 0 ,7.6 - chamfer_height])
+    translate([0, 0 ,4 - chamfer_height])
       cylinder(h = chamfer_height, r1 = r1, r2 = r2);
   }
   translate([0, -offset, 0]){
     cylinder(h = h, r = r1);
-    translate([0, 0 ,7.6 - chamfer_height])
+    translate([0, 0 ,4 - chamfer_height])
       cylinder(h = chamfer_height, r1 = r1, r2 = r2);
   }
 }

juqs_alpha_collar.scad

@@ -17,8 +17,14 @@ $fn = 100;
 */
 
 throw_types = [
-  [10.6, "A"],
+  [12, "A"],
-  [10.6 / sqrt(2 / 1.4), "AN"]
+  [12 / sqrt(2 / 1.4), "AN"]
 ];
 
-juqs(model = OCTN, collar = FLAT, throw_type = throw_types[1], shaft_r = (7.2/2)/cos(180/$fn));
+juqs(model = OCTN, collar = STEPPED, throw_type = throw_types[0], shaft_r = (7.2/2)/cos(180/$fn), pivot_depth = 8.05);
+
+/*
+translate([0,0,-8.05])
+  rotate([throw_types[0][0],0,0])
+    cylinder(h=100, r=(7.2/2)/cos(180/$fn));
+*/

juqs_collar.scad

@@ -19,11 +19,13 @@ grommet_dist = 6.8; //distance the grommet sits below this component
 grommet_depth = 6.4; //thickness of grommet (when compressed)
 pivot_depth = grommet_dist + grommet_depth / 2;
 
-VERSION = "V2.9";
+VERSION = "V3.0";
 
-juqs(model = OCTN, collar = ISLAND, throw_type= throw_types[2]);
+hollow(OCTN, throw_types[2][0], shaft_r, pivot_depth);
 
-module juqs(model = CIR, ver = VERSION, collar = SHORT, throw_type = throw_types[0], shaft_r = shaft_r, pivot_depth = pivot_depth) {
+//juqs(model = OCTN, collar = SHORT, throw_type= throw_types[2], production = true);
+
+module juqs(model = CIR, ver = VERSION, collar = SHORT, throw_type = throw_types[0], shaft_r = shaft_r, pivot_depth = pivot_depth, production = false) {
   throw = throw_type[0];
   collar_h = collar[0];
   bevel = collar[1];
@@ -36,25 +38,13 @@ module juqs(model = CIR, ver = VERSION, collar = SHORT, throw_type = throw_types
           base(b=0);
           collar(collar_h);
           if(stepped)
-            collar(collar_h + step_h, 23.5 / 2);
+            collar(h = collar_h + step_h, r = 23.5 / 2, bevel = production ? 0.5 : undef);
         };
-        bevels(collar_h + step_h, bevel[0], bevel[1]) {
+        bevels(collar_h + step_h, bevel[0], production ? 0 : bevel[1]) {
-          translate([0,0,-pivot_depth]){
+          hollow(model, throw, shaft_r, pivot_depth);
-            if(model == CIR)
-              cir_gate(throw, shaft_r);
-            if(model == SQR)
-              shape_gate(sqr_poly, throw, shaft_r);
-            if(model == OCT)
-              shape_gate(oct_poly, throw, shaft_r, 0.5);
-            if(model == OCTR)
-              octr_gate(throw, shaft_r);
-            if(model == OCTN)
-              shape_gate(octn_poly, throw, shaft_r, 0.5);
-            if(model == SQRN)
-              sqrn_gate(throw, shaft_r);
-          }
-        }
        };
+      };
+      if(!production) {
         font = "Open Sans:style=Bold";
         fontsize = 4.2;
         translate([0,0,-0.1]) {
@@ -67,10 +57,28 @@ module juqs(model = CIR, ver = VERSION, collar = SHORT, throw_type = throw_types
             }
           };
         }
+      }
     };
   };
 };
 
+module hollow(model = CIR, throw, shaft_r, pivot_depth){
+  translate([0,0,-pivot_depth]){
+    if(model == CIR)
+      cir_gate(throw, shaft_r);
+    if(model == SQR)
+      shape_gate(sqr_poly, throw, shaft_r);
+    if(model == OCT)
+      shape_gate(oct_poly, throw, shaft_r, 0.5);
+    if(model == OCTR)
+      octr_gate(throw, shaft_r);
+    if(model == OCTN)
+      shape_gate(octn_poly, throw, shaft_r, 0.5);
+    if(model == SQRN)
+      qrn_gate(throw, shaft_r);
+  }
+}
+
 module bevels(collar_height, b_size = 0.8, t_size = 0.8){
   if(b_size > 0) {
     translate([0,0,-0.1])