Major cleanup and refactor
This commit is contained in:
Quinn
+147
-139
@@ -1,173 +1,181 @@
|
||||
$fn = 100;
|
||||
$fn = 360;
|
||||
|
||||
collar_r = 34.7/2;
|
||||
collar_h = 8.7; // short collar: 8.7, full: 18
|
||||
collar_inner_corner_r = 9/2; //should roughly match shaft for best feel
|
||||
collar_inner_r = 13.2/2; //inner radius at bottom of official collar is 13.2
|
||||
shaft_r = 9/2; //should roughly match shaft for best feel
|
||||
//inner radius at bottom of official collar is 13.2
|
||||
|
||||
max_throw_circle = 10;
|
||||
cardinal_throw = 10;
|
||||
max_throw_square = 14;
|
||||
|
||||
grommet_dist = 6.8; //distance the grommet sits below this component
|
||||
grommet_depth = 6.4; //thickness of grommet (when compressed)
|
||||
pivot_depth = grommet_dist + grommet_depth / 2;
|
||||
|
||||
VERSION = "V1A";
|
||||
|
||||
module rotate_about_pt(rotation, pt) {
|
||||
translate(pt)
|
||||
rotate(rotation)
|
||||
translate(-pt)
|
||||
children();
|
||||
CIR = "CIR";
|
||||
SQR = "SQR";
|
||||
OCT = "OCT";
|
||||
OCTR = "OCTR";
|
||||
OCTN = "OCTN";
|
||||
OCTNR = "OCTNR";
|
||||
|
||||
rotate([0,0,0]){
|
||||
/*
|
||||
* OCTNR corner test (seems to also match OCTN, nice!)
|
||||
* shaft(shaft_r, pivot_depth, [cardinal_throw+1.95,0,45]);
|
||||
*/
|
||||
juqs(model = OCTNR, ver = VERSION);
|
||||
}
|
||||
|
||||
module collar (full = false, bezel = 1) {
|
||||
h = 8.7;
|
||||
r = 34.7/2;
|
||||
if(full) {
|
||||
h = 18;
|
||||
}
|
||||
union() {
|
||||
cylinder(h=h - bezel, r=r);
|
||||
translate([0,0,h - bezel]) {
|
||||
cylinder(h=bezel, r1 = r, r2= r - bezel);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module base (size = [37.16, 37.1, 2.8], r = 8) {
|
||||
w = size.x;
|
||||
l = size.y;
|
||||
h = size.z;
|
||||
corner_offset = [w/2 - r, l/2 - r];
|
||||
hull() {
|
||||
translate([corner_offset.x, corner_offset.y, 0]) {
|
||||
cylinder(h=h, r=r);
|
||||
module juqs(model, ver) {
|
||||
rotate([0,0,0]) {
|
||||
difference() {
|
||||
difference() {
|
||||
union() {
|
||||
base();
|
||||
collar(collar_h);
|
||||
};
|
||||
translate([-corner_offset.x, corner_offset.y, 0]) {
|
||||
cylinder(h=h, r=r);
|
||||
};
|
||||
translate([corner_offset.x, -corner_offset.y, 0]) {
|
||||
cylinder(h=h, r=r);
|
||||
};
|
||||
translate([-corner_offset.x, -corner_offset.y, 0]) {
|
||||
cylinder(h=h, r=r);
|
||||
if(model == CIR)
|
||||
cir_hollow(cardinal_throw, shaft_r, pivot_depth);
|
||||
if(model == SQR)
|
||||
sqr_hollow(max_throw_square, shaft_r, pivot_depth);
|
||||
if(model == OCT)
|
||||
oct_hollow(cardinal_throw, shaft_r, pivot_depth);
|
||||
if(model == OCTR)
|
||||
octr_hollow(cardinal_throw, shaft_r, pivot_depth);
|
||||
if(model == OCTN)
|
||||
octn_hollow(cardinal_throw, shaft_r, pivot_depth);
|
||||
if(model == OCTNR)
|
||||
octnr_hollow(cardinal_throw, shaft_r, pivot_depth);
|
||||
};
|
||||
translate([0, -11, -0.1]) {
|
||||
modtext = str("JUQS-",model);
|
||||
font = "Open Sans:style=Bold";
|
||||
fontsize = 3.75;
|
||||
mirror([1,0,0]) {
|
||||
linear_extrude(0.7){
|
||||
text(modtext, font=font, size=fontsize, halign = "center");
|
||||
translate([0, -5, 0])
|
||||
text(ver, font=font, size=fontsize, halign = "center");
|
||||
}
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
module ci_pivot (throw, shaft_r, depth) {
|
||||
module shaft(r, depth, rotation) {
|
||||
translate([0,0,-pivot_depth]){
|
||||
rotate(rotation)
|
||||
cylinder(h = 100, r = shaft_r);
|
||||
}
|
||||
};
|
||||
|
||||
module base (size = [37.16, 37.1, 2.8], r = 8) {
|
||||
w = size.x;
|
||||
l = size.y;
|
||||
h = size.z;
|
||||
corner_offset = [w/2 - r, l/2 - r];
|
||||
hull() {
|
||||
translate([corner_offset.x, corner_offset.y, 0])
|
||||
cylinder(h=h, r=r);
|
||||
translate([-corner_offset.x, corner_offset.y, 0])
|
||||
cylinder(h=h, r=r);
|
||||
translate([corner_offset.x, -corner_offset.y, 0])
|
||||
cylinder(h=h, r=r);
|
||||
translate([-corner_offset.x, -corner_offset.y, 0])
|
||||
cylinder(h=h, r=r);
|
||||
};
|
||||
};
|
||||
|
||||
// use h=18 for full collar
|
||||
module collar (h = 8.7, r = (34.7/2), bezel = 1) {
|
||||
union() {
|
||||
cylinder(h=h - bezel, r=r);
|
||||
translate([0,0,h - bezel]) {
|
||||
cylinder(h=bezel, r1 = r, r2= r - bezel);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
module ci_pivot (throw, shaft_r) {
|
||||
h = 50;
|
||||
top_r = h * tan(throw) + shaft_r;
|
||||
cylinder(h = h, r1 = shaft_r, r2 = top_r);
|
||||
}
|
||||
|
||||
module sq_pivot (throw, shaft_r, depth, sharpness = 1, throw_extend = 0) {
|
||||
h = 50;
|
||||
corner_r = shaft_r / sharpness;
|
||||
corner_offset = corner_r * (sharpness - 1);
|
||||
translate([0,0,-depth]) {
|
||||
hull() {
|
||||
translate([corner_offset,0,0]){
|
||||
rotate([0,throw,0]){
|
||||
ci_pivot(throw = throw_extend, shaft_r = corner_r, depth = depth);
|
||||
}
|
||||
}
|
||||
translate([-corner_offset,0,0]){
|
||||
rotate([0,-throw,0]){
|
||||
ci_pivot(throw = throw_extend, shaft_r = corner_r, depth = depth);
|
||||
}
|
||||
}
|
||||
rotate([0,0,90]){
|
||||
translate([corner_offset,0,0]){
|
||||
rotate([0,throw,0]){
|
||||
ci_pivot(throw = throw_extend, shaft_r = corner_r, depth = depth);
|
||||
}
|
||||
}
|
||||
translate([-corner_offset,0,0]){
|
||||
rotate([0,-throw,0]){
|
||||
ci_pivot(throw = throw_extend, shaft_r = corner_r, depth = depth);
|
||||
}
|
||||
}
|
||||
}
|
||||
};
|
||||
}
|
||||
h = 50;
|
||||
shaft_r = shaft_r / sharpness;
|
||||
corner_offset = shaft_r * (sharpness - 1);
|
||||
translate([0,0,-depth]) {
|
||||
hull() {
|
||||
translate([corner_offset,0,0])
|
||||
rotate([0,throw,0])
|
||||
ci_pivot(throw = throw_extend, shaft_r = shaft_r);
|
||||
translate([-corner_offset,0,0])
|
||||
rotate([0,-throw,0])
|
||||
ci_pivot(throw = throw_extend, shaft_r = shaft_r);
|
||||
rotate([0,0,90]) {
|
||||
translate([corner_offset,0,0])
|
||||
rotate([0,throw,0])
|
||||
ci_pivot(throw = throw_extend, shaft_r = shaft_r);
|
||||
translate([-corner_offset,0,0])
|
||||
rotate([0,-throw,0])
|
||||
ci_pivot(throw = throw_extend, shaft_r = shaft_r);
|
||||
}
|
||||
};
|
||||
}
|
||||
}
|
||||
|
||||
module sq_hollow (corner_r, slope) {
|
||||
rotate([0,0,45]) {
|
||||
sq_pivot(slope, corner_r, pivot_depth);
|
||||
}
|
||||
module cir_hollow(slope, shaft_r, depth) {
|
||||
translate([0,0,-depth])
|
||||
ci_pivot(slope, shaft_r);
|
||||
}
|
||||
|
||||
module sqr_hollow (slope, shaft_r, depth) {
|
||||
rotate([0,0,45])
|
||||
sq_pivot(slope, shaft_r, depth);
|
||||
};
|
||||
|
||||
module oct_hollow (corner_r, slope) {
|
||||
hull(){
|
||||
rotate([0,0,45]) {
|
||||
sq_pivot(slope, corner_r, pivot_depth);
|
||||
}
|
||||
sq_pivot(slope, corner_r, pivot_depth);
|
||||
}
|
||||
};
|
||||
|
||||
module soct_hollow (corner_r, slope) {
|
||||
hull(){
|
||||
rotate([0,0,45]) {
|
||||
sq_pivot(slope + 2, corner_r, pivot_depth, 4);
|
||||
}
|
||||
sq_pivot(slope, corner_r, pivot_depth, 4);
|
||||
}
|
||||
};
|
||||
|
||||
module roct_hollow (corner_r, slope) {
|
||||
union(){
|
||||
rotate([0,0,45]) {
|
||||
sq_pivot(slope, corner_r, pivot_depth);
|
||||
}
|
||||
sq_pivot(slope, corner_r, pivot_depth);
|
||||
}
|
||||
};
|
||||
|
||||
module nroct_hollow (corner_r, slope) {
|
||||
//diag_r = corner_r * 1.075;
|
||||
union(){
|
||||
rotate([0,0,45]) {
|
||||
sq_pivot(slope + 1, corner_r, pivot_depth, 1, 1);
|
||||
}
|
||||
sq_pivot(slope, corner_r, pivot_depth);
|
||||
}
|
||||
};
|
||||
|
||||
translate([0,0,-pivot_depth]){
|
||||
rotate([0,0,0]){
|
||||
cylinder(h = 100, r = collar_inner_corner_r);
|
||||
module oct_hollow (slope, shaft_r, depth) {
|
||||
hull() {
|
||||
rotate([0,0,45])
|
||||
sq_pivot(slope, shaft_r, depth);
|
||||
sq_pivot(slope, shaft_r, depth);
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
rotate([0,0,0]) {
|
||||
difference() {
|
||||
difference() {
|
||||
union() {
|
||||
base();
|
||||
collar(false);
|
||||
module octn_hollow (slope, shaft_r, depth) {
|
||||
hull(){
|
||||
rotate([0,0,45])
|
||||
sq_pivot(slope + 3, shaft_r, depth, 3);
|
||||
sq_pivot(slope, shaft_r, depth, 3);
|
||||
}
|
||||
};
|
||||
//sq_hollow(collar_inner_corner_r, max_throw_square);
|
||||
//oct_hollow(collar_inner_corner_r, max_throw_circle);
|
||||
//soct_hollow(collar_inner_corner_r, max_throw_circle);
|
||||
//roct_hollow(collar_inner_corner_r, max_throw_circle);
|
||||
nroct_hollow(collar_inner_corner_r, max_throw_circle);
|
||||
//ci_pivot(max_throw_circle, collar_inner_corner_r, pivot_depth);
|
||||
|
||||
module octr_hollow (slope, shaft_r, depth) {
|
||||
union(){
|
||||
rotate([0,0,45])
|
||||
sq_pivot(slope, shaft_r, depth);
|
||||
sq_pivot(slope, shaft_r, depth);
|
||||
}
|
||||
};
|
||||
|
||||
module octnr_hollow (slope, shaft_r, depth) {
|
||||
union(){
|
||||
rotate([0,0,45])
|
||||
sq_pivot(slope + 1, shaft_r, depth, 1, 1);
|
||||
sq_pivot(slope, shaft_r, depth);
|
||||
}
|
||||
};
|
||||
/*
|
||||
translate([0, -13, -0.1]) {
|
||||
font = "Open Sans:style=Bold";
|
||||
mirror([1,0,0]) {
|
||||
linear_extrude(0.6)
|
||||
//text("QJ-SQR-V2", font=font, size=3.5, halign = "center");h = 8.7;
|
||||
//text("QJ-OCT-V2", font=font, size=3.5, halign = "center");
|
||||
//text("QJ-OCS-V2", font=font, size=3.5, halign = "center");
|
||||
//text("QJ-OCR-V2", font=font, size=3.5, halign = "center");
|
||||
text("QJ-OCR-V2", font=font, size=3.5, halign = "center");
|
||||
}
|
||||
}
|
||||
*/
|
||||
|
||||
module rotate_about_pt(rotation, pt) {
|
||||
translate(pt)
|
||||
rotate(rotation)
|
||||
translate(-pt)
|
||||
children();
|
||||
};
|
||||
|
||||
|
||||
Reference in New Issue
Block a user